Villa renovation
Standalone villa work, including structural change where capability and approvals allow.
Service
Townhouse renovation
Renovation inside an owner-occupied townhouse, where a shared structure, community rules and constrained access decide as much about the programme as the design does.
Contacting Rawdha starts a review, not a project. Site information is not a quotation, offer, contract or binding price; the inquiry may be declined.
Townhouse work is not a smaller villa renovation. The constraints are different in kind, not in degree: you share walls with neighbours who did not commission the work, the community usually sets rules on hours and access, and there is rarely anywhere convenient to put a skip. A scope that ignores those facts will not survive contact with the site.
Scope
What townhouse renovation covers
Scope is set per property. This is the range the service works within, not a fixed inclusion list.
- Internal reconfiguration within the unit, subject to what the structure and the community permit.
- Kitchens and bathrooms, including waterproofing, drainage falls and the finishes above them.
- Services — electrical, plumbing, drainage and cooling reworked within the unit's own distribution.
- Joinery — kitchens, wardrobes, storage and built-in furniture designed to the reworked plan.
- Finishes — floors, walls, ceilings, doors, ironmongery and decoration to a written specification.
- Structural change, where the community and the relevant authority permit it and where the work suits our capability. In a shared structure this is materially harder than in a standalone villa, and we will say so.
- Terrace, garden and carport works where they form part of a renovation already in scope and are permitted by the community.
Existing condition
The four constraints that shape a townhouse programme
- Asset
- WEBV2-IMG-005 · V3-STL-010
- Truth status
- Original concept illustration — not project evidence
- Recorded
- 2026-08-27
Original schematic concept — not a map, named community approval, property or resident depiction.
Each of these is established at survey rather than assumed on site, because each of them can change what is buildable.
- Shared structure. Party walls, shared slabs and common service routes limit what can be removed, cut or rerouted. Establishing which elements are shared is part of the survey.
- Community rules. Communities commonly set working hours, access routes, noise limits, waste handling requirements and approval procedures. These vary and are checked for your community before the programme is built.
- Access and logistics. Material delivery, waste removal, storage and parking are frequently the binding constraint. Where access adds cost, that cost is stated in the bill of quantities rather than hidden in a rate.
- Neighbours. People next door did not choose your renovation. Noise-generating work is planned into defined windows and the protection, cleaning and access arrangements are agreed before mobilisation.
In a townhouse the approval path is usually the critical path, so it is identified during planning and written into the programme as a set of preconditions rather than a formality at the end.
Inclusions, exclusions and cost drivers
What moves the figure
Every item below is priced as a measured item, a named allowance or a stated provisional sum. Nothing is absorbed into a rate and recovered somewhere less visible.
Access
Where materials arrive and where waste goes can change the labour content of every single item on the schedule.
Shared elements
Work touching a party wall, a shared slab or a common service route carries both a technical and a permission cost.
Working hours
A community window that shortens the working day lengthens the programme, and the programme is part of the price.
Existing condition
What is behind the finishes decides how much removal precedes installation, and removal is where surprises live.
In practice
What we do not claim about approvals
Permission is somebody else's decision, so we describe the dependency rather than promising the outcome.
- We do not claim existing approval status in any community.
- We do not claim that a permission will be granted.
- We do not publish an approval timeline that is not in our control.
- A refusal or a delay becomes a written change with its cost and programme effect stated before anything is done differently.
Stating the dependency honestly is more useful to you than a confident date that nobody can hold us to.
Bands
Which bands this work falls into
The band describes the size and complexity of what you are asking for. It does not set your price and it carries no fixed inclusions.
- Focused Upgrade, AED 50,000 – 100,000 — one defined area.
- Family Refresh, AED 100,000 – 250,000 — several connected areas coordinated together.
- Whole-Home Modernization, AED 250,000 – 500,000 — most of the home in one programme.
- Full Transformation, AED 500,000 – 1,000,000 — layout, services and finishes substantially reworked.
- Estate / Structural Transformation, AED 1,000,000+ — large or structurally complex work, subject to capability and approvals.
Inquiry eligibility begins at AED 10,000. Work between AED 10,000 and AED 50,000 is discretionary and is not a sixth formal band. Every inquiry is reviewed and may be declined.
FAQs
Questions before you write
Is townhouse work cheaper than villa work?
Not automatically. A townhouse is usually smaller, but access, shared structure and community rules can add labour and sequencing cost that a standalone villa never carries. The bill of quantities settles it, not the property type.
Who has to approve the work?
That depends on your community, your unit and the exact work. We identify the applicable path during planning, name who must issue each permission, and write the dependency into the programme.
Can a wall between two rooms be removed?
Only after the structure is established and the necessary permissions are obtained. In a connected property this is materially harder than in a standalone villa, and if the answer is no we will say so rather than price it optimistically.
How are the neighbours handled?
Noise-generating work is planned into defined windows, and protection, cleaning and access arrangements are agreed before mobilisation rather than renegotiated weekly.
Evidence
Published records for this service
Evidence slot pending Reviewed 2026-08-27
No project record is published for this service yet.
A published Rawdha record has to carry the project code, the community and property type, the customer objective, the before condition and findings, the scope with inclusions and exclusions, the approvals, price drivers and changes, the hidden-work and completion record, and exact written publication permission. Until a project completes all eight, this slot stays visibly empty rather than being filled with an anonymous interior.
Next
Residential interior fit-out
Fit-out of a residential property to a defined specification.
Areas
The ten Dubai communities in which we take villa and townhouse work.